MSI MS-7740

3-10
BIOS Setup
MS-7740
Chapter 3
▶CPU Phase Control
This item allows you to select the power phase mode to reach the best power saving
function.
▶Wake Up Event Setup
Press <Enter> to enter the sub-menu.
▶Wake Up Event By
Setting to [BIOS] activates the following 󰘰elds, and use the following 󰘰elds to set the
wake up events. Setting to [OS], the wake up events will be de󰘰ned by OS.
▶Resume By RTC Alarm
The 󰘰eld is used to enable or disable the feature of booting up the system on a
scheduled time/date.
▶Date/ HH:MM:SS
If Resume By RTC Alarm is set to [Enabled], the system will automatically resume
(boot up) on a speci󰘰c date/hour/minute/second speci󰘰ed in these 󰘰elds (using the
<+> and <-> to select the date & time settings).
▶Resume By PCI or PCI-E Device
When set to [Enabled], the feature allows your system to be awakened from the
power saving modes through any event on PCI or PCIE device.
▶Resume From S3 by USB Device
The item allows the activity of the USB device to wake up the system from S3 (Sus-
pend to RAM) sleep state.
▶Resume From S3 by PS/2 Mouse/ Keyboard
These items determine whether the system will be awakened from S3 state when
input signal of the PS/2 mouse/ keyboard is detected.