Save & Exit
▶Discard Changes and Exit
Use this item to abandon all changes and exit setup.
▶Save Changes and Reboot
Use this item to save changes and reset the system.
▶Save Changes
Use this item to save changes.
▶Discard Changes
Use this item to abandon all changes.
▶Restore Defaults
Use this item to load the optimized default values set by the BIOS vendor.
== Boot Override ==
The installed storage devices will appear on this menu, you can select one of them be
a boot device.
▶Built-in EFI Shell
Use this item to enter the EFI Shell.
To Next Page
Loading...
