MSI MS-98I0 - 3. BIOS Setup: Super IO Configuration; Serial Port Settings; Serial Port Mode Selection; Serial Port Device Mode

3-7
BIOS Setup MS-98I0
▶Super IO Conguration
▶Serial Port 1/ 2/ 3/ 4/ 5/ 6
This setting enables/disables the specied serial port.
▶Change Settings
This setting is used to change the address & IRQ settings of the specied
serial port.
▶Mode Select
Select an operation mode for the serial port 1.
▶Device Mode
Select an operation mode for the serial port 6.
▶FIFO Mode
This setting controls the FIFO data transfer mode.
▶Shared IRQ Mode
This setting provides the system with the ability to share interrupts among its
serial ports.
▶ Watch Dog Timer
You can enable the system watch-dog timer, a hardware timer that generates
a reset when the software that it monitors does not respond as expected each
time the watch dog polls it.