MSI MS-N0E1 - Page 15

110W（MS-N0E1）Disassembly Guide
3、LCD MODULE ASSY
3.12： Dip the cleaning rod with Alcohol into the
adhesive between the touchpad and the Bezel, at the
same time, pull the side1 of the Bezel.
3.13： Dip the cleaning rod with Alcohol into the
adhesive between the touchpad and the Bezel, at the
same time, pull the side2 of the Bezel.
3.14： Pull the left upper corner of the Bezel to
separate with the touchpad.