BIOS Setup
Security menu
w Supervisor Password
When this function is selected, a message box will appear on the screen as
below:
Type the password, up to six characters in length and press [Enter]. The
password typed now will replace any previously set password from CMOS
memory. You may also press [ESC] to abort the selection without entering
a password.
Settings are described below:
Setup
The password prompt appears only when end users try to
run Setup.
Always
A password prompt appears every time when the notebook
is powered on or when end users try to run Setup.
To clear the previous password, just press [Enter] when you are prompted
to enter a new password. A message box will show up confirming the
password will be disabled. Once the password is disabled, the system will
boot and you can enter Setup without entering any password.
Version 1.21.1097. Copyright (C) 2007 American Megatrends, Inc.
Atpio Setup Utility - Copyright (C) 2007 American Megatrends, Inc.
Enter:
+/-:
F1:
F2:
F9:
F4:
Select
Change Opt.
General Help
Previous Values
Optimized Default
Save
Select Screen
Select Item
Main Advanced SecurityBoot Save & Exit
Supervisor Password
User Password
To Next Page
Loading...
Need help?
General
