11
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
MPRT OFF (Default) ∙ When MPRT is enabled, Brightness
cannot be enabled and will be grayed
out.
∙ MPRT and HDCR cannot be enabled
simultaneously.
ON
Refresh Rate Location Left Top
(Default)
∙ Location is adjustable in OSD Menu.
Press the OK Button to confirm and
apply your Refresh Rate Location.
∙ This monitor follows and works
at the Operating System’s preset
Screen Refresh Rate.
Right Top
Left
Bottom
Right
Bottom
OFF
ON
Alarm Clock Location Left Top
(Default)
∙ After setting the time, press the OK
Button to activate the timer.
∙ Users have to manually restore their
preset Alarm Clock after any AC
power loss and reconnection.
Right Top
Left
Bottom
Right
Bottom
OFF (Default)
15:00 00:01 ~
99:59
30:00
45:00
60:00
Screen
Assistance
None (Default) ∙ Users can adjust Screen Assistance
in any mode.
To Next Page
Loading...
