14
OSD Menus
Input Source
1st Level Menu 2nd Level Menu Description
HDMI1 ∙ Users can adjust Input Source in any mode.
HDMI2
DP
Auto Scan OFF ∙ Users can use the Navi Key to select Input
Source at below status:
•While “Auto Scan” is set to “OFF” with the
monitor at power saving mode;
•While “No Signal” message box is shown
on the monitor.
ON (Default)
Navi Key
1st Level Menu
2nd Level
Menu
Description
Up / Down / Left /
Right
OFF ∙ Up Button default is Game Mode.
∙ Down Button default is Screen Assistance.
∙ Left Button default is Alarm Clock.
∙ Right Button default is Input Source.
∙ All Navi Key items can be adjusted via
OSD Menus.
Brightness
Game Mode
Screen
Assistance
Alarm Clock
Input Source
Refresh Rate
Info. On Screen
Night Vision
To Next Page
Loading...
