MSI Optix Series - Page 28

2-9
OSD Setup
2-8
HDCR
(OFF)
■ Users can adjust HDCR in any Mode�
■ HDCR enhances image quality by increasing the
contrast of images�
■ When HDCR is set to ON, Brightness will be
grayed out�
■ HDCR and Anti Motion Blur cannot be enabled
simultaneously�
(ON)
Anti Motion Blur
(OFF)
■ For PAG272QR, PAG272QR2, and PAG272R�
■ Brightness cannot be adjusted when Anti Motion
Blur is set to ON�
■ When Response Time is set to Fastest with at
least 75Hz Screen Refresh Rate, Anti Motion Blur
will be automatically enabled�
■ When Screen Refresh Rate is lower than 75HZ,
Anti Motion Blur cannot be enabled and Response
Time cannot be set to Fastest�
■ When Anti Motion Blur is enabled, HDCR cannot
be enabled and will be grayed out�
■ This function is recommended for cinema, FPS
and Racing games�
■ When FreeSync is enabled, Anti Motion Blur will
be grayed out�
(ON)
Image
Enhancement
OFF ■ Image Enhancement enhances image edges to
improve their acutance�
■ Users can adjust Image Enhancement in any
Mode�
Weak
Medium
Strong
Strongest
h Image
1st Level Menu 2nd/3rd Level Menu Description
Brightness 0-100 ■ Users can adjust Brightness in User, RTS,
RPG and Reader mode�
■ Brightness will be grayed out when Anti
Motion Blur or HDCR are enabled�
Contrast 0-100 ■ Users can adjust Contrast in any Mode�
Sharpness 0-5 ■ Users can adjust Sharpness in any Mode�
■ Sharpness improves clarity and details of
images�
Color
Temperature
Cool ■ Color Temperature default is Normal�
■ Use Up or Down Button to select and
preview mode e󰘯ects.
■ Press the Middle Button to con󰘰rm and
apply your mode type�
■ Users can adjust Color Temperature in
Customization mode.
Normal
Warm
Customization R (0-100)
G (0-100)
B (0-100)