MSI P31 Neo Series - Memory

2-7
Hardware Setup
Memory
These DIMM slots are used for installing memory modules.
For more information on compatible components, please visit http://global.msi.com.
tw/index.php?func=testreport
Due to chipset limitations, to enable dual channel mode or single channel mode,
installing memory modules should refer to the following table.
Memory Installation Combination
(SS : single side, DS : double side, X : none installed memory)
DDR2
240-pin, 1.8V
64x2=128 pin 56x2=112 pin
Dual Channel Mode
DIMM1 DIMM2 DIMM3 DIMM4
Combination1 DS/SS X DS/SS X
Combination2 DS/SS X X DS/SS
Combination3 X DS/SS DS/SS X
Combination4 X DS/SS X DS/SS
Combination5 SS SS SS SS
Combination1 DS/SS X X X
Combination2 X DS/SS X X
Combination3 X X DS/SS X
Combination4 X X X DS/SS
Combination5 SS SS X X
Combination6 X X SS SS
Combination7 SS SS DS/SS X
Combination8 SS SS X DS/SS
Combination9 DS/SS X SS SS
Combination10 X DS/SS SS SS
Single Channel Mode