MSI P55-CD53 series - Button (OptOnal)

Hardware Setup ▍
MS-7586
2-21
Hardware Setup ▍
MS-7586
button (optionaL)
The manboard provdes the followng buttons for you to set the computer’s functon.
Ths secton wll explan how to change your manboard’s functon through the use of
button.
OC Gene Button: OC Gene (optonal)
Ths button s used to auto-overclock for the system. Press ths button to enable the OC
Gene functon when the system s n power o󰘯 state, meanwhle, the button wll lght
and lock. And then the system wll automatcally detect the optmum values to overclock
after bootng the system. To dsable the OC Gene functon, please press the button
agan after power o󰘯 the system, meanwhle, the button lght wll o󰘯 and unlock. and the
system wll restore the default for next boot.
Important
Please nstall the DDR3 1333 and up memory and equp better heat snk/ cooler wth
OC Gene functon.
We do not guarantee the OC Gene overclockng range and the damages or rsks
caused by the OC Gene overclockng behavor.
You can dsable the OC Gene functon n BIOS setup. And we suggest you to save the
OC Gene con󰘰guraton to overclockng pro󰘰le n BIOS for future usng.
Power On Button: POWER (optonal)
Ths button s used to turn-on or turn-o󰘯 the system. Press the button to turn-on or turn-
o󰘯 the system.
Base Clock Control Buttons: SW1, SW2 (optonal)
These buttons are used to ncrease or decrease the Base clock frequency. Pressng the
SW1/ SW2 button once wll ncrease/ decrease the Base clock frequency 1 MHz when
the system s n regular operaton state.
SW1SW2