4
Getting Started
Installing the Monitor Stand
1. Leave the monitor in its protective foam packaging. Align, insert and push the
stand bracket towards the monitor groove until it locks in place.
2. In case of improper installation, push the release tab to release and reinstall the
stand.
3. Connect the base to the stand and tighten the base screw to secure the base.
4. Make sure the stand assembly is properly installed before setting the monitor
upright.
22
33
11
⚠
Important
∙
Place the monitor on a soft, protected surface to avoid scratching the display panel.
∙
Do not use any sharp objects on the panel.
∙
This product comes with NO protective film to be removed by the user! Any
mechanical damages to the product including removal of the polarizing film may
affect the warranty!
To Next Page
Loading...
Need help?
General
