29
Overview of Components
SLOW_1: Slow Mode Booting Switch
This switch is used for LN2 cooling solution, that provides the extreme overclocking
conditions, to boot at a stable processor frequency and to prevent the system from
crashing.
Normal
Enabled
Important
Users will try extreme low temperature overclocking at their own risks. The
JBAT1: Clear CMOS (Reset BIOS) Jumper
the motherboard to save system configuration data. If you want to clear the system
Resetting BIOS to default values
1. Power off your computer and unplug it from the outlet.
2.
3.
4. Plug your computer back into the outlet and power on.
To Next Page
Loading...
