drve (FAT/ 32 format only).
Select UEFI le to boot from
When the BIOS Boot functon as sets to [Enabled], ths tem s selectable. Ths tem 
allows to select partcular UEFI le from the USB/ Storage (FAT/ 32 format only) drve. 
And the system wll boot from selected UEFI le.
Save current UEFI  rom to le
Please setup a specc folder n  specc USB/  Storage drve  to  save UEFI  le from  
ROM chp data. Note: t only supports FAT/ 32 le system drve.
Select UEFI le to ash
Ths tem allows you to select partcular UEFI le from the USB/ Storage (FAT/ 32 for
-
mat only) drve for updatng BIOS.
Securty
Admnstrator Password 
Ths tem s used to set the admnstrator password. When a admnstrator password 
has been set, you wll be prompted to enter t every tme you try to enter BIOS Setup. 
User Password 
Ths tem s used to set the user password. When a user password has been set, you 
wll be prompted to enter t every tme you try to enter the operatng system. 
Important
When you select the Admnstrator Password / User Password tem, a password box wll 
appear on the screen. Type the password, and press <Enter>. The password typed now 
wll replace any prevously set password from CMOS memory. You wll be prompted to 
conrm the password. Retype the password and press <Enter>. You may also press 
<Esc> to abort the selecton and not enter a password.
To clear a set password, just press <Enter> when you are prompted to enter the pass-
word.  A  message  wll  show  up  conrmng  the  password  wll  be  dsabled.  Once  the 
password s dsabled, the system wll boot and you can enter Setup/ OS wthout enter-
ng any password.
These two tems prevent an unauthorzed person from changng any part of your system 
conguraton.
U-Key
Ths tem s used to enable/ dsable USB drver devce as a key.
▶
▶
▶
▶
▶
▶