Then the followng screen appears to ndcate that the creaton s nshed.7.
Go to the Create Volume eld and press <Enter>, the followng screen appears for 
you to conrm f you are sure to create the RAID volume. Press <Y> to contnue.
6.
[                                     ]
CREATE VOLUME MENU
[             ]
HELP
           Name :
Press  ENTER  to  create  the  speced  volume.
[ ↑↓] - Change         [TAB] - Next          [ESC] - Prevous Menu         [ENTER] - Select 
      RAID Level :
     Dsks :
     Strp Sze :
     Capacty :
     Sync :
Volume0
RAID1(Mrror)
Select  Dsks
N / A
XXX.X  GB
N / A
Create Volume
WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST.
Are  you  sure  you  want  to  create  ths  volume?  (Y / N)  :
DISK / VOLUME INFORMATION
[                                                ]
4.       Recovery Volume  Optons
5.       Acceleraton Optons
6.       Ext
RAID  Volumes :
ID       Name                      Level     Strp                  Sze    Status           Bootable
0         Volume0                      RAID1(Mrror)               N / A        XXX.XGB    
Normal             Yes
Physcal  Devces :
Port  Devce  Model                 Seral  #                                                  Sze    Type/Status (Vol  ID)
1       XXXX-XXXXXXXX          XXXXXXXXXXXXXX                    XXX.XGB Member  Dsk(0)
2       XXXX-XXXXXXXX          XXXXXXXXXXXXXX                    XXX.XGB Member  Dsk(0)
[ ↑↓] - Select                            [ESC] - Ext               [ENTER] - Select Menu
1.       Create  RAID  Volume
2.       Delete  RAID  Volume
3.       Reset Dsks to Non-RAID
MAIN MENU
[                     ]
[                        ]
MAIN  MENU