MSI Z68A-GD55 series - Reset Disks to Non-RAID

B-8
Intel RAID
MS-7681
Appendx B
Intel RAID
MS-7681
Appendx B
Reset Dsks to Non-RAID
Select opton 3 Reset Dsks to Non-RAID and press <Enter> to delete the RAID
volume and remove any RAID structures from the drves. The followng screen
appears:
DISK / VOLUME INFORMATION
[ ]
4. Recovery Volume Optons
4. Recovery Volume Optons
5. Ext
RAID Volumes :
None de󰘰ned.
Physcal Devces :
Port Devce Model Seral # Sze Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Dsk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Dsk
[ ↑↓] - Select [ESC] - Ext [ENTER] - Select Menu
1. Create RAID Volume
2. Delete RAID Volume
Resettng RAID dsk wll remove ts RAID structures
and revert t to a non-RAID dsk.
[ ]
RESET RAID DATA
WARNING : Resettng a dsk causes all data on the dsk to be lost.
(Ths does not apply to Recovery volumes)
Select the dsks that should be reset.
[ ↑↓] - Prevous/ Next [SPACE] - Selects [ENTER] - Selecton Complete
Port Drve Model Seral # Sze Status
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Member Dsk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Member Dsk
[ ]
MAIN MENU
Use the <Space> key to select the dsks and press <Enter> key. A con󰘰rmaton sen-
tence wll appear below, and then press <Y> key to accept the selecton.
Important
You wll lose all data on the RAID drves and any nternal RAID structures when you
perform ths operaton.
Possble reasons to “Reset Dsks to Non-RAID” could nclude ssues such as ncom
-
patble RAID con󰘰guratons or a faled volume or faled dsk.
■
•
•