mspa Starry - User Manual

Questions and Answers

A
Andrea GardnerSep 23, 2025
Why doesn't the filter pump work on my MSpa Hot Tub?
- K
  Katherine ConnerSep 23, 2025
  If the filter pump on your MSpa Hot Tub isn't working, it could be due to a clogged filter cartridge. Try cleaning or replacing the filter cartridge. If the issue persists, it may indicate a filter system failure, and you should contact your local MSpa Service Center.
C
colin80Aug 25, 2025
How to clean the water in my MSpa Hot Tub?
- M
  Michelle RamirezAug 25, 2025
  If the water in your MSpa Hot Tub isn't clean, it could be due to several factors. The water may have been used for an extended period, so try changing the water. Insufficient filtering time could also be the cause, so extend the filtration time. A dirty filter cartridge can also lead to unclean water, so clean or replace the filter cartridge. Improper water maintenance may also be the reason, so refer to the chemical manufacturer’s instructions.
E
Eric TaylorAug 25, 2025
How to fix no display on the control panel of my MSpa Hot Tub?
- S
  Steven SotoAug 26, 2025
  If there is no display on the control panel of your MSpa Hot Tub, first check for a power socket failure and change or repair the socket. If that's not the issue, the PRCD might be off; reset it by following the PRCD Testing section. If pressing the Reset button doesn't display anything, or if the PRCD is broken, contact the MSpa Service Center.
J
jenniferlewisAug 26, 2025
What to do if the filter pump on my mspa Starry Hot Tub doesn't work?
- J
  Julie ObrienAug 27, 2025
  If the filter pump on your MSpa Hot Tub isn't working, the filter cartridge might be clogged by dirt or other objects. Clean or replace the filter cartridge. If the problem persists, there may be a filter system failure, and you should contact the MSpa Service Center.
K
kellyamandaAug 27, 2025
Why doesn't the bubble air blower work on my mspa Starry Hot Tub?
- P
  paige18Aug 27, 2025
  If the bubble air blower on your MSpa Hot Tub isn't working, it might be due to the auto-off function, which activates after 10 minutes. Wait for 10 minutes and then turn on the Bubble button again. Also, check if the inflation knob is in the position; if so, turn it to the position and try turning on the bubble button again. If neither of these solutions works, the internal parts may be damaged, and you should contact the MSpa Service Center.
R
richardpatelSep 14, 2025
Why is there no bubble function in my mspa Starry?
- K
  kristen61Sep 14, 2025
  If there are no bubbles in your MSpa Hot Tub, it might be because the auto-off function has activated after 10 minutes. Wait for 10 minutes and then turn the Bubble button on again. If the problem persists, it could be due to damaged internal parts or a broken one-way valve, in which case you should contact your local MSpa Service Center.
K
Kelly McgrathSep 12, 2025
Why does my mspa Starry Hot Tub keep losing air?
- L
  leemarcusSep 12, 2025
  If your MSpa Hot Tub is losing air, the air valve might be loose. Inflate the spa until the yellow section of the manometer is pushed out, and ensure the valve is screwed tightly; replace it if necessary. Also, check for holes or splits on the spa tub by applying soapy water to the seams; if you find a leak, clean and dry the area before applying the repair patch.
K
Kara JonesSep 13, 2025
What to do if the filter pump on my mspa Starry does not work?
- C
  Collin CarsonSep 13, 2025
  If the filter pump on your MSpa Hot Tub isn't working, the filter cartridge might be clogged with dirt or other objects. Try cleaning or replacing the filter cartridge. If the issue persists, it may indicate a filter system failure, and you should contact your local MSpa Service Center.
C
cheryljacksonSep 4, 2025
How to fix a MSpa Hot Tub that loses air?
- J
  Jamie CuevasSep 4, 2025
  If your MSpa is losing air, start by checking the air valve. Inflate the spa until the yellow section of the manometer is pushed out, and ensure the valve is tightly screwed. If necessary, replace the valve. If the issue persists, inspect the spa tub for holes or splits. To locate a leak, apply soapy water to the seams; bubbles will appear where there's a leak. Clean and dry the area before applying the provided repair patch.
M
michael01Sep 2, 2025
How to fix an MSpa Hot Tub that loses air?
- M
  Misty ZavalaSep 2, 2025
  If your MSpa Hot Tub is losing air, first check if the air valve is loose. Inflate the spa until the yellow section of the manometer is pushed out, and ensure the valve is screwed tightly. If necessary, replace the valve. Also, inspect the spa tub for any holes or splits. If you find a leak, clean and dry the area, then use the repair patch supplied with your spa.