mspa Starry - User Manual

Questions and Answers

A
Andrew WellsAug 28, 2025
What to do if my mspa Starry Hot Tub loses air?
- E
  Evan HaneyAug 28, 2025
  If your MSpa Hot Tub is losing air, start by checking the air valve. Inflate the spa until the yellow section of the manometer is pushed out, and ensure the valve is screwed on tightly. If necessary, replace the valve. Also, inspect the spa tub for holes or splits. To find leaks, apply soapy water to the seams; bubbles will appear where there's a leak. Clean and dry the leaking area, then apply the repair patch that came with your spa.
K
kellyamandaAug 27, 2025
Why doesn't the bubble air blower work on my mspa Starry Hot Tub?
- P
  paige18Aug 27, 2025
  If the bubble air blower on your MSpa Hot Tub isn't working, it might be due to the auto-off function, which activates after 10 minutes. Wait for 10 minutes and then turn on the Bubble button again. Also, check if the inflation knob is in the position; if so, turn it to the position and try turning on the bubble button again. If neither of these solutions works, the internal parts may be damaged, and you should contact the MSpa Service Center.
J
jenniferlewisAug 26, 2025
What to do if the filter pump on my mspa Starry Hot Tub doesn't work?
- J
  Julie ObrienAug 27, 2025
  If the filter pump on your MSpa Hot Tub isn't working, the filter cartridge might be clogged by dirt or other objects. Clean or replace the filter cartridge. If the problem persists, there may be a filter system failure, and you should contact the MSpa Service Center.
E
Eric TaylorAug 25, 2025
How to fix no display on the control panel of my MSpa Hot Tub?
- S
  Steven SotoAug 26, 2025
  If there is no display on the control panel of your MSpa Hot Tub, first check for a power socket failure and change or repair the socket. If that's not the issue, the PRCD might be off; reset it by following the PRCD Testing section. If pressing the Reset button doesn't display anything, or if the PRCD is broken, contact the MSpa Service Center.
C
colin80Aug 25, 2025
How to clean the water in my MSpa Hot Tub?
- M
  Michelle RamirezAug 25, 2025
  If the water in your MSpa Hot Tub isn't clean, it could be due to several factors. The water may have been used for an extended period, so try changing the water. Insufficient filtering time could also be the cause, so extend the filtration time. A dirty filter cartridge can also lead to unclean water, so clean or replace the filter cartridge. Improper water maintenance may also be the reason, so refer to the chemical manufacturer’s instructions.