Do you have a question about the mspa DELIGHT BUBBLE Spa and is the answer not in the manual?
Procedures and requirements for establishing authorized service centers.
Duties and responsibilities of authorized after-sale service centers towards customers.
Details manufacturer's warranty against defects for MSpa products.
Manufacturer's support for authorized distributors and importers regarding warranty.
Information on spa heating speed and factors affecting it.
Details on MSpa filter cartridge part numbers and compatibility.
Proper procedures for inflating and deflating the spa to prevent air leaks.
Warnings and advice to prevent liner damage from over-inflation.
Guidance on repairing small liner tears and holes using provided kits.
Guidelines for using the spa in low temperatures and preventing freezing.
Explains normal temperature display variations on the control panel.
Troubleshooting and prevention tips for broken spa cover zippers.
Guidance on maintaining spa water quality through proper chemical treatment.
Instructions on locating the MSpa serial number for identification and service.
Explanation of the anti-icing system's function to prevent freezing.
Step-by-step guide for assembling the MSpa unit.
Visual identification and names of major electric components used in MSpa.
Schematic illustrating the electrical connections within the MSpa system.
Guide to connecting wires to the power board assembly.
Detailed steps for replacing the spa's control box.
Instructions for replacing the bubble generator unit.
Procedure for replacing the PTC heating element in the spa.
Steps involved in replacing the spa's transformer unit.
Guide for replacing the spa's filter pump.
Detailed instructions for replacing the main power board.
Steps for replacing the control panel's internal circuit board (PCB).
Procedure for replacing the spa's check valve.
Instructions for replacing the control knob on the spa panel.
Guide for replacing the reed or flow switch components.
Introduction to attached flow charts for diagnosing spa errors.
Flow chart for diagnosing and resolving air leakage and inflation issues.
Flow chart for identifying and fixing water leakage problems.