mspa DELIGHT BUBBLE Spa User Manual

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 35 -
5
2:
Question:
Where should I install the filter cartridge? Why is there hole(s) on the surface of filter cartridge?
Does the filter cartridge have a filter bag?
Answer
Please screw the filter onto the water inlet (upper fitting with two bulges) on the spa wall by turning it
clockwise, through which water is drawn from the pool by a pump. The hole(s) on the surface of filter
cartridge is a security to make sure there is always minimum water flow t
o avoid damage to heater and
pump when filter cartridge would be blocked. MSpa does have no cover or bag for the filter cartridge
anymore
53
:
Question:
Can I use MSpa in the rain?
Answer
MSpa can leave outside in light rain as it is of IPX5, protection against harmful ingress of water. But we
do not suggest people use it with bubbling open because the water may cause air pump damped and
rusted which could result the air pump works improperly and will void your warranty. And also you’ll need
to make sure to keep the power plug dry.
54
:
Question:
What if I already screw off the inlet and outlet when the product was full with water??? Did I
hurt the engine?
Answer
No, it’ll not hurt the engine, but the water leakage is a big problem, which would damage or cause
electric shock if there is any other electrical equipment around the spa
55:
Question
Why there is red light keeps flashing or red and green lights alternately flashing
?
Answer
This is filter Cartridge Cleaning Reminder: When red light keeps flashing (Filter function is OFF) or
red and green lights alternately flashing (Filter function is ON), the filter cartridge shall be
cleaned or replaced. After that, press Filter button for 3s to delete the reminder.
Chapter 7. Attachment
DELIGHT Spa Check Flow –E0-E1.pdf (Same as SS18)
DELIGHT Spa Check Flow –heating failure.pdf (Same as SS18)
DELIGHT Spa Check Flow -NO DISPLAY.pdf (Same as SS18)
SS20 spare parts list EU/SW/UK version
Repairing video download link:
https://www.adrive.com/public/Se7C6Z/2019%20delight%20concept
2019-2020 Premium/Elite/Concept trouble shooting easy checking
Problem
Cause
Solution
E0
Water temperature is lower
than
0 degree or higher than 55
degree
Video guide:
Change the water

mspa DELIGHT BUBBLE Spa Specifications

General

Brand	mspa
Model	DELIGHT BUBBLE Spa
Category	Hot Tub
Language	English