To Next PageTo Next Page
Need help?Do you have a question about the MST FXX-D S and is the answer not in the manual?
General| Scale | 1/10 |
|---|---|
| Wheelbase | 257mm |
| Drive Type | Shaft Drive |
| Chassis Material | Plastic |
| Suspension | Independent |
| Shock Type | Oil-filled |
| Tire Type | Rubber |
| Steering | Bellcrank |
| Battery | Not Included |
| Radio | Not Included |
Overview of the FXX-D S, detailing technical specs, features, and usage notes.
Tools not included in the kit, necessary for proper assembly of the FXX-D S.
Optional and beneficial parts and materials for the FXX-D S assembly process.
Installation of sponge parts and the battery guard assembly to the chassis.
Mounting the ESC plate and front/rear suspension mount components.
Building the front lower arms with shafts, adjusters, and ball connectors.
Connecting the completed front lower arms to the main chassis structure.
Mounting the steering servo posts and connecting the steering joint plate.
Assembling the main steering arms and linkage adjusters.
Building the front upper arms using shafts, spacers, and ball connectors.
Instructions on how to adjust the caster angle for optimal steering performance.
Securing the electric motor and its mount to the chassis.
Attaching the front upper arms to the motor mount assembly.
Building the adjustable gear ratio mechanism and drive gear train.
Constructing the reducer housing and attaching the propeller shaft.
Building the rear lower suspension arms with associated components.
Mounting the gear reducer unit onto the chassis.
Building the rear solid axle differential unit for the FXX-D S.
Instructions for adjusting the rear toe angle for optimal handling.
Building the rear universal joint driveshafts for the FXX-D S.
Connecting the rear driveshafts to the assembled rear gear box.
Completing the assembly of the rear solid axle differential unit.
Mounting the completed rear gear box assembly onto the car's chassis.
Mounting the upper deck, gyro mount, and battery presser to the chassis.
Building the front axle, including knuckles, hubs, and ball connector placement.
Mounting the assembled front axle unit onto the FXX-D S chassis.
Building the rear axle components, including hubs and brake parts.
Mounting the completed rear axle assembly onto the car.
Mounting the front shock tower assembly to the chassis frame.
Mounting the rear shock tower assembly to the chassis frame.
Step-by-step guide to assembling oil-filled shock absorbers and filling them.
Building the front bumper assembly and attaching body mount posts.
Mounting the assembled front and rear shock absorbers to the chassis.
Assembling the steering servo, horn, and saver turnbuckle linkage.
Securing the steering servo and electronic speed controller to the chassis.
Installing the gyro sensor, radio receiver, and ESC unit.
Securing the hard case battery pack to the chassis for operation.
Attaching the front wheels and tires to the axle assemblies.
Attaching the rear wheels and tires to the axle assemblies.
Adjusting front caster, camber, toe-in, and ride height for optimal handling.
Adjusting rear camber, toe-in, and ride height for stability.
Setting suspension mount positions and shock absorber specifications.
The formula for calculating final drive ratio using internal gears and pinion.
Charts showing different gear ratio options based on component combinations.
