CAUTION: the oil may be hot immediately after use - risk of burns!
• Underneath the waste oil drain plug (G) put a container for the used
oil.
• First unscrew the oil filler cap with the dipstick (a) and then the drain
plug (b):
• When the oil no longer flows, screw the drain plug (b) back on and
refill with fresh oil through the filler plug.
m) Replacing the air filter:
• (applies to closed generators only) unscrew the flap in the side
housing ("AIR FILTER") to get to the filter housing cover:
• Remove the filter housing cover screw:
To Next Page
Loading...
Need help?
General