a. Tank filler cap
b. Exhaust muffler
c. Casing
d. Transport handle
e. Flap for the engine and its handling (on both sides)
f. Access to the air filter (on the side - not visible in the picture)
h. Transport wheels
3.2. Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and the relative humidity should
not exceed 90%. Place the unit in a way that ensures good air circulation and set it
in a well-ventilated area. Maintain a minimum distance of 1.5 m from each wall of
the unit. Keep the unit away from any hot surfaces. Always use the device on an
even (if possible - level), stable, clean, fireproof and dry surface and out of the reach
of children and people with reduced mental, sensory and intellectual functions.
BEFORE FIRST START-UP:
To Next Page
Loading...
Need help?
General