EasyManuals Logo

MSW MSW-AVR 8500F MAX EURO5 User Manual

MSW MSW-AVR 8500F MAX EURO5
Go to English
227 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
Let the machine cool down completely.
Drain the fuel from the tank.
Remove the bands on the ends of the fuel hoses on both sides of the
filter.
Remove the filter from the hoses (turn the filter right/left - do not pull
forcefully)
Rinse the disassembled filter in fresh diesel fuel or replace it with a
new one if necessary.
o) Storage/extended downtime:
Run the machine without load for 3 minutes.
When the oil is still warm but not fresh, replace it with a new
one.
Add a few ml of fresh engine oil to the combustion chamber
(removing the plug on the cylinder head).
(only for engines with a recoil starter) press the decompression
lever (see the picture below - in closed models, access after
removing the top cover in the housing) and simultaneously pull
the starter lever 2-3 times.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MSW MSW-AVR 8500F MAX EURO5 and is the answer not in the manual?

MSW MSW-AVR 8500F MAX EURO5 Specifications

General IconGeneral
BrandMSW
ModelMSW-AVR 8500F MAX EURO5
CategoryPortable Generator
LanguageEnglish