Need help?Do you have a question about the MT Helmets REVENGE 2 S and is the answer not in the manual?
Developed by MT HELMETS based on the revolutionary new HIRP technology. Two shell sizes to optimize weight, fit and comfort.
The helmet features four air intakes located at the front, which enable the influx of cool air, while the rear spoiler allows excellent evacuation of hot air.
The pivoting mechanism system of the MT-V-14B shield guarantees a uniform seal all around and allows the screen to be replaced quickly and easily with just one hand.
The interior padding is not only made of hypoallergenic fabric that is removable and washable, but it also keeps you cool and dry in spring/summer and warm in cooler temperatures.
The deflector prevents circulating air from entering the helmet. It also helps to further reduce road noise inside the helmet.
Congratulations on your choice of a model made by MT HELMETS. This helmet combines the latest technology, engineering and design available today.
For maximum safety, it is vital that your MT HELMETS helmet fits properly on your head, with the retention strap correctly and securely fastened.
Once the chinstrap is opened, you need to take both sections of the strap and keep them slightly separated to facilitate passage of your head.
The micrometric closure allows for easy and precise adjustment of the chinstrap length. Pass the end of the strap into the mechanism.
Instructions for removing side pads, liner, and chin guard protector for maintenance or cleaning.
Instructions on how to activate and deactivate the front air inlets for direct ventilation to the screen.
How to slide the air intake lock mechanism to activate or deactivate incoming airflow for the upper vents.
How to operate the shield, including releasing it from its sealed position and lowering it to seal again.
Steps to lift the shield to maximum position and press the central button to release it.
Steps to align the shield with the mounting position and press on the sides of the button until a click is heard.
Instructions for removing cover screws to insert UCS systems into the housing and replacing the screws.
Guidance on cleaning helmet components with mild detergent, avoiding dryers, and cleaning the shield and shell.
Important safety warnings regarding helmet usage, cleaning, modifications, and reuse after impact.
Information on how to proceed with a warranty claim by visiting mthelmets.com/warranty.
General| Brand | MT Helmets |
|---|---|
| Model | REVENGE 2 S |
| Category | Motorcycle Accessories |
| Language | English |
To Next Page
