Need help?Do you have a question about the MT Helmets ATOM 2 SV and is the answer not in the manual?
Developed by MT HELMETS based on the revolutionary new ABS technology. Two shell sizes to optimize weight, fit and comfort.
The helmet features two air intakes located at the front, which enable the influx of cool air, while the warm air is effectively let out through its rear.
The pivoting mechanism system of the MT-V-35 shield guarantees a uniform seal all around and allows the screen to be replaced quickly and easily.
The interior padding is not only made of hypoallergenic fabric that is removable and washable, but it also keeps you cool and dry in spring/summer and warm in cooler temperatures.
The deflector prevents circulating air from entering the helmet. It also helps to further reduce road noise inside the helmet.
Congratulations on your choice of a model made by MT HELMETS. This helmet combines the latest technology, engineering and design available today.
At MT HELMETS, we are committed to creating helmets that are as environmentally friendly as possible. For this reason, helmet parts can be easily replaced.
The main function of a helmet is to protect your head from impact in the event of an accident. It is engineered to offer comfort while riding.
For maximum safety, it is vital that your MT HELMETS helmet fits properly on your head, with the retention strap correctly and securely fastened.
The shield closes with an optimal airtight seal. This feature is enabled by the front button that locks the screen.
Push up the side tab located on the left side of the helmet to deploy the sun visor. Push down the side tab to retract the sun visor.
Once the chinstrap is opened, you need to take both sections of the strap and keep them slightly separated to facilitate passage of your head.
The micrometric closure allows for easy and precise adjustment of the chinstrap length. Pass the end of the strap into the micrometric mechanism.
Instructions on how to remove the side pads and the helmet liner by releasing snaps and tabs.
Unscrew the bolt and four screws beneath the chin guard to remove the plastic protector and detach the chin guard.
Pass the strap through the opening of the pad, align the cheek pad plate, and attach the side pad snaps to the shell.
Press the trigger located at the lower front part of the chin bar and lift it to its highest point.
Lower the chin bar until you hear the lower trigger click.
Push the front button to release the shield from its sealed position allowing it to be raised. Lower the shield until you hear a click.
Push up the side tab on the left to deploy the sun visor. Push down the side tab on the left to retract the sun visor.
Lift the shield to its highest raised position. Unscrew the shield's fastening mechanism using an Allen key to completely release it.
Align the shield with the mounting position and screw it in using an Allen key. Lower the shield to the closed position.
Activate the sun visor and raise the clear screen. Press from inside outwards firmly to remove the sun visor.
Ensure the sun visor mechanism is correct. Insert the sun visor into the same slots until you hear a click.
Slide down the air intake lock mechanism to activate airflow. Slide it upwards to deactivate.
Slide backwards the air intake lock mechanism to activate airflow. Slide it forwards to deactivate.
Unscrew the two Allen key No. 2 screws to release the spoiler. Push to detach it from the helmet.
Remove screws from the cover to insert UCS systems into the housing. Place screws back in their original position.
Wash helmet components with mild detergent in lukewarm water and air dry. Clean shield with mild soap and water.
Do not ride without fastening helmet, clean with solvents, paint, drop from height, or place on mirrors. Do not reuse after accident.
For any warranty claim, please go to mthelmets.com/warranty.
General| Type | Full Face |
|---|---|
| Shell Material | Polycarbonate |
| Certification | ECE 22.05 |
| Retention System | Double D-ring |
| Pinlock Ready | Yes |
| Visor | Anti-scratch |
| Sun Visor | Integrated |
| Ventilation | Adjustable air intakes |
| Interior | Removable and washable |
| Bluetooth Ready | Yes |
| Shell Size | XS to XXL |
To Next Page
