MT Helmets ATOM 2 SV - Safety; Retention System

Atom 2 SV 
22

Once the chinstrap is opened, you need to take both sections of the strap and keep them
slightly separated in order to facilitate the passage of your head. When performing this
movement, it is recommended to keep the two sections of the strap away from your
thumbs so that they are properly positioned.
Position the parts that make up the retention system and secure them according to the
appropriate recommendations for each the helmet. Check that the tension, and therefore
the positioning of the helmet, is correct.

Release the retention chinstrap, hold the two sections slightly apart as explained in the
previous paragraph and remove the helmet.