MT Helmets ATOM 2 SV - Side Pad and Liner Removal

Atom 2 SV 
24

There are 3 snaps that hold the side pads in place
1
Gently lift the side pad away from the shell in order to release the snaps.
2
Grasp the
side pad from its centre and gently pull on the chinstrap.

1
Pull on the rear part of the liner until the two snaps holding it are released.
2
Pull the
front part of the liner until the tabs are completely separated from the shell. Once both
steps are completed, the liner will be completely detached from the helmet.
2
2
1
1