Operation
5
16
Bagger Usage
NOTE: When both grass bags are full, place the tractor on a firm,
level surface, disengage the PTO, turn the tractor engine off and
set the parking brake.
Flip Seat up.1.
Lift up grass bag cover as instructed on Page 14 in Step 7. 2.
Do not remove the chute tube assembly from the tractor.
Remove the grass bags by lifting these up and moving the 3.
bags away from the bag support assembly.
Empty the grass clippings at a proper disposal sight, use 4.
the handle at the bottom of each grass bag. Holding the
bag firmly, empty the contents
Replace grass bags, close lid, flip down seat, restart your 5.
tractor and resume cutting your grass.
To Next Page
Loading...
Need help?
General
