MTD 660 - Important Safe Operation Practices; General Operation Safety

3
Models 660, 665, 680 & 685
REF.
NO.
PART
NO. DESCRIPTION
1 728-0162 Flat-head Rivet, 1/4
2 710-0642 Self-tapping Screw, 1/4-20 x .75
3 712-0185 U-type Speed Nut, 1/4-20
4 712-0429 Lock Nut, 5/16-18
5 712-0324 Lock Nut, 1/4-20
6 726-0201 Speed Nut, .3125
7 726-04012 Push-on Nut, .25
8 731-1099A Lens
9 738-04015 Shoulder Screw, 5/16-18 x .625
10 738-0952A Shoulder Screw, 1/4-20 x .375 /.125
11 749-0722C Grille Support Rod
12 783-0250A Hood w/ Louvers
13 629-0469B Headlamp Harness Assembly
14 725-0963 Headlamp, 12V
15 725-1649 Headlamp Socket
16 731-1097F Grille
17 725-1396 Ignition Switch, 6-pin
18 725-0201 Keys (pair)
19 710-0751 Hex Screw, 1/4-20 x .620
20 783-0150B RH Side Panel
21 783-0151B LH Side Panel
22 17632D Support Bracket
23 710-0599 Self-tapping Screw, 1/4-20 x .5
24 710-0607 Self-tapping Screw, 5/16-18 x .5
25 710-0788 Self-tapping Screw, 1/4-20 x 1.0
26 726-3054 U-type Speed Nut, 1/4-20
27 731-04179 Dash Panel (models w/o choke knob)
731-04082 Dash Panel (models w/ choke knob)
28 746-04020A Throttle / Choke Control, 18.5”
746-04023A Throttle Control, 35.5”
746-04030A Throttle Control, 18.5”
29 736-3090 Flat Washer, .260 x .720 x .060
30 726-0230 Cable Tie, 34.75
31 751-0555B Fuel Tank, 1.5 gal.
32 751-0603 Fuel Tank Cap
33 746-0614A Choke Control, 38”
746-0616A Choke Control, 23”
34 731-0954 Steering Bellow, 4.75”
NOTE: Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.