MTD BL410 User Manual

Reissued 12/02
Item
Part No. Description
1 791-182059 Air Cleaner/Muffler Cover Assembly
(includes 2 & 40)
2 791-180350 Air Cleaner Filter
3 791-180351 Carburetor Mounting Screw Assembly
4 791-180226 Wavey Washer
5 791-182160 Choke Lever Assembly (includes 6)
6 791-182161 Choke Knob and Screw
7 791-182162 Choke Lever and Plate (includes 5)
8 753-04333 Carburetor Assembly (includes 9 & 20)
9 791-610675 Carburetor Gasket
10 791-181860 Carb Mount Screw
11 791-182607 Primer and Hose Assembly
12 753-1196 Carb Mount Assembly (includes 10 & 14)
13 791-684451 Reed Assembly
14 753-1208 Carburetor Mount Gasket
15 753-04369 Crank Case Service Assembly
(includes 10 & 23)
16 791-612134 Rear Mounting Pad
17 753-04306 Fuel Tank Assembly (includes 18-20)
18 791-182612 Fuel Cap Assembly
19 791-181168 Fuel Return Line
20 791-682039 Fuel Line Assembly
21 791-145308 Front Mounting Pad
22 791-683065 Shroud Assembly (includes 23)
23 791-181861 Shroud Screw
24 791-182064 Shroud Extension and Stand
25 791-182736 Flywheel Assembly
26 791-181065 Spacer
27 753-04232 Recoil Pulley Assembly
28 791-613102 Recoil Spring
29 791-180930 Pulley Retainer Assembly
30 791-611061 Rope Guide
31 791-180317 Fuel Tank Guard Assembly
32 791-181079 Pull Handle
33 791-613103 Rope
34 791-181912 Screw
Item
Part No. Description
35 753-04238 Starter Housing Assembly
(includes 27-30, 32-34 & 40)
36 791-182368 Clutch Washer
37 791-182369 Clutch Rotor Assembly
38 791-153592 Clutch Drum Assembly
39 791-180098 Clutch Cover Assembly (includes 40)
40 791-181345 Screw
41 791-153597 Upper Clamp Assembly
42 753-04337 Module Assembly
43 791-182880 Wire Lead
44 791-610311 Spark Plug
45 753-04159 Exhaust Gasket
46 791-182174 Muffler Assembly (includes 45, 47 & 53)
47 791-182464 Muffler Mounting Bolt Assembly
48 753-04323 Cylinder Assembly (includes 50 & 51)
49 753-1207 Piston and Rod Assembly
50 753-1197 Cylinder Gasket
51 791-182723 Cylinder Bolt
52 791-611063 Ground Tab
53 791-182747 Spark Arrestor
* 753-04134 Engine Gasket Kit
* 791-180090 O.E.M. Carburetor Repair Kit
* 791-180091 Gasket-Diaphragm Repair Kit
* 753-1209 Piston Ring
* 753-04359 Short Block Assembly
(includes 15, 44, 48-51)
* 791-181599 Clutch Springs (Qty. 2)
* not shown
40
1
2
3
8
10
12
3
4
5
7
6
11
13
14
15
49
50
19
51
21
16
17
18
20
36
37
38
39
4140
31
32
25
26
27
29
40
33
35
34
29
24
43
28
42
48
44
45
47
23
30
22
9
52
ENGINE PARTS - MODEL BL410
2-CYCLE GAS CULTIVATOR
PPN 21BK410G163
53
46

MTD BL410 Specifications

General

Brand	MTD
Model	BL410
Category	Tiller
Language	English

Summary

Engine Parts

Air Cleaner and Carburetor Components

Components related to the engine's air intake and fuel delivery system, including filters, gaskets, and mounting hardware.

Fuel System Components

Parts for the fuel tank, lines, caps, and related assemblies, essential for fuel delivery to the engine.

Ignition and Starting System Components

Components for the engine's ignition system and the recoil starting mechanism.

Engine Core Components

Major internal and external engine parts such as the cylinder, piston, rod, and associated gaskets and mounting hardware.

Exhaust and Muffling System

Parts for the engine's exhaust system, including the muffler, gaskets, and mounting bolts.

Clutch and Drive Components

Parts related to the engine's clutch mechanism and associated springs and covers.

Boom and Cultivator Parts

Handlebar and Control Components

Parts for the main handlebar assembly, including grips, clamps, and throttle controls.

Drive Shaft and Housing

Components for the flexible drive shaft and its protective housing assembly.

Cultivator Tine and Gearbox Assembly

Parts related to the cultivator's tines, gearbox, and wheel assembly for ground engagement.

Guard and Mounting Hardware

Components for the protective guard and the associated hardware for mounting.