MTD Cub Cadet ZTX6 54 User Manual

Important Safe Operation Practices • Assembly • Operation • Service and Maintenance • Troubleshooting
OPERATOR’S MANUAL
WARNING
California Proposition 65
Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of
California to cause cancer and birth defects or other reproductive harm.
Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of
California to cause cancer and reproductive harm. Wash hands after handling.
WARNING
Read and follow all safety rules and instructions in this manual before attempting to operate this machine.
Failure to comply with these instructions may result in personal injury.
Record Product Information
Before setting up and operating your new equipment,
please locate the model plate on the equipment and
record the information in the provided area to the right.
You can locate the model plate by lifting up the seat
and looking under the seat pan. This information will be
necessary, should you seek technical support via our web
site or with your local authorized service dealer.
MODEL NUMBER
SERIAL NUMBER
Form No. 769-22033A
(October 21, 2019)
Important Safe Operation Practices ..................... 2
Assembly .................................................................. 8
Operation ................................................................12
Service and Maintenance ......................................18
Troubleshooting .................................................... 26
Parts/Warranty .............. See Separate Supplement
Table of Contents
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all
models and the model depicted may differ from yours.
Zero-Turn Tractor
Lapbar Drive Control Levers

MTD Cub Cadet ZTX6 54 Specifications

General

Engine Power	24 HP
Cutting Deck Width	54 inches
Fuel Capacity	3.5 gallons
Cutting Height	1.5 - 4.5 inches
Blades	3
Turning Radius	Zero
Deck Material	Fabricated Steel
Type	Zero-Turn Mower
Engine	Kohler 7000 Series
Transmission	Hydrostatic
Warranty	3-year unlimited hours

Summary

Record Product Information

Record Tractor Product Details

Area to record tractor model and serial number for technical support.

Safe Operation Practices

General Information and Preparation

Read all instructions before operation; inspect area and ensure safety before starting.

Operator Protective System (OPS)

Details on ROPS and seat belt usage for operator safety during tip-overs.

Operating and Child Safety

Guidelines for safe operation, including speed and awareness, and child safety rules.

Slope, Fire, Fuel, Hauling, and Towing Safety

Precautions for slopes, fuel handling, fire hazards, and safe hauling/towing.

Service Safety and Emissions Information

Safety measures for service, emissions compliance, and spark arrestor maintenance.

Safety Symbols Explanation

Explanation of various safety symbols and their meanings for safe operation.

Slope Gauge Usage

Using the Slope Gauge for Safe Operation

Instructions on how to use the slope gauge to determine safe operating slopes.

Assembly Procedures

Tractor Preparation and Initial Setup

Manual movement, hitch installation, and ROPS setup instructions.

Seat and Battery Installation

Installing the operator's seat and connecting battery cables.

Lever, Deck Components, and Battery Details

Adjusting levers, chute deflector, deck wheels, and battery information.

Battery Handling, Maintenance, and Charging

Procedures for connecting, maintaining, removing, and charging the battery.

Seat Adjustment Mechanisms

Adjusting the seat position and mechanical suspension system.

Operation Guide

Controls, Switches, and Deck Operation

Explanation of lapbar levers, deck controls, ignition switch, and PTO engagement.

Console Features and Service Indicators

Description of console elements, service minder messages, and controls.

Engine Starting Procedures

Steps for starting the engine, including cold weather and jump starting.

Driving and Maneuvering the Tractor

Instructions for driving forward, reverse, and turning maneuvers.

Stopping Tractor and Engaging PTO

Procedures for stopping the tractor and engaging/disengaging the PTO.

Mowing Operations and Safety

Safety and best practices for mowing with the tractor.

Service and Maintenance

Comprehensive Maintenance Schedule

A detailed schedule of regular maintenance tasks and intervals.

Post-Operation Care and Cleaning Procedures

Procedures for cleaning and caring for the tractor after use.

Engine and Transmission Maintenance

Steps for changing engine oil, filter, and transmission fluid.

Storage Preparation and Deck Adjustments

Preparing for storage and adjusting deck lift and leveling.

Deck and Drive System Service

Procedures for removing, installing, and replacing the mower deck and belts.

Tractor Blade and Belt Service

Maintenance for tractor blades and transmission drive belt.

Troubleshooting Guide

Engine Related Issues

Common engine problems like starting, overheating, and erratic running with causes and remedies.

Operational and Performance Issues

Troubleshooting issues like uneven cuts, vibrations, and poor idling.