MTD Cub Cadet Ultima ZTX5 60 User Manual

Important Safe Operation Practices • Assembly • Operation • Service and Maintenance • Troubleshooting
OPERATOR’S MANUAL
WARNING
California Proposition 65
Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of
California to cause cancer and birth defects or other reproductive harm.
Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of
California to cause cancer and reproductive harm. Wash hands after handling.
WARNING
Read and follow all safety rules and instructions in this manual before attempting to operate this machine.
Failure to comply with these instructions may result in personal injury.
Record Product Information
Before setting up and operating your new equipment,
please locate the model plate on the equipment and
record the information in the provided area to the right.
You can locate the model plate by lifting up the seat
and looking under the seat pan. This information will be
necessary, should you seek technical support via our web
site or with your local authorized service dealer.
MODEL NUMBER
SERIAL NUMBER
Form No. 769-22033A
(October 21, 2019)
Important Safe Operation Practices ..................... 2
Assembly .................................................................. 8
Operation ................................................................12
Service and Maintenance ......................................18
Troubleshooting .................................................... 26
Parts/Warranty .............. See Separate Supplement
Table of Contents
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all
models and the model depicted may differ from yours.
Zero-Turn Tractor
Lapbar Drive Control Levers

MTD Cub Cadet Ultima ZTX5 60 Specifications

General

Engine Manufacturer	Kawasaki
Engine Displacement	726cc
Cutting Width	60 inches
Cutting Height	1.0 - 4.5 inches
Transmission	Hydrostatic
Transmission Type	Hydrostatic
Transmission Manufacturer	Hydro-Gear
Transmission Model	ZT-3100
Forward Speed	8.5 mph
Reverse Speed	3.5 mph
Fuel Capacity	5 gallons
Weight	880 lbs
Engine Model	FR730V
Engine Type	V-Twin
Turning Radius	Zero-turn
Seat Type	High-back seat with armrests

Summary

Record Product Information

Safe Operations Practices

General Information and Preparation

Overview of general safety rules, preparation, and operator protective systems.

Safe Operating Procedures

Details safe operating practices, including children and general rules.

Hazard Avoidance and Specific Topics

Covers slopes, fire, fuel, towing, emissions, and spark arrestors.

Safety Notes

Addresses service safety, notice regarding emissions, and spark arrestors.

Safety Symbols Guide

Understanding Safety Symbols

Explains the meaning of various safety symbols on the tractor and in the manual.

Slope Gauge

Using the Slope Gauge

Instructions on how to use the provided gauge to determine safe slope operation.

Assembly

Initial Tractor Setup

Covers manual movement, hitch, ROPS, and seat installation.

Component Assembly

Instructions for assembling deck wheels, battery, and control levers.

Battery and Seat Systems

Details battery handling, charging, and seat latch/adjustment.

Specific Assembly Tasks

Covers seat tether and mechanical suspension adjustments.

Operation

Controls and Indicators

Explains lapbar controls, deck adjustments, ignition, and indicators.

Pre-Operation Checks

Covers fuel, oil, battery checks, and air filter service.

Starting and Driving

Procedures for starting the engine, driving, and safe maneuvers.

Driving and Maneuvering

Instructions on driving the tractor forward, backward, turning, and zero-turn maneuvers.

Mowing Best Practices

Guidelines and tips for effective and safe mowing.

Service and Maintenance

Maintenance Schedule

A chart detailing required maintenance tasks and intervals.

Tractor Care and Cleaning

Post-operation care, cleaning, and storage procedures.

Engine and Transmission Service

Instructions for oil changes, fluid checks, and filter replacements.

Adjustments and Deck Servicing

Covers deck leveling, pedal adjustment, wheel settings, and storage.

Belt and Blade Maintenance

Steps for deck removal, belt replacement, and blade care.

Troubleshooting

Engine and Performance Issues

Solutions for engine starting, running, overheating, and performance problems.

Cut Quality and Vibration

Troubleshooting for uneven cuts, vibration, and deck leveling.