MTD Cub Cadet Ultima ZTX4 60 User Manual

Important Safe Operation Practices • Assembly • Operation • Service and Maintenance • Troubleshooting
OPERATOR’S MANUAL
WARNING
California Proposition 65
Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of
California to cause cancer and birth defects or other reproductive harm.
Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of
California to cause cancer and reproductive harm. Wash hands after handling.
WARNING
Read and follow all safety rules and instructions in this manual before attempting to operate this machine.
Failure to comply with these instructions may result in personal injury.
Record Product Information
Before setting up and operating your new equipment,
please locate the model plate on the equipment and
record the information in the provided area to the right.
You can locate the model plate by lifting up the seat
and looking under the seat pan. This information will be
necessary, should you seek technical support via our web
site or with your local authorized service dealer.
MODEL NUMBER
SERIAL NUMBER
Form No. 769-22033A
(October 21, 2019)
Important Safe Operation Practices ..................... 2
Assembly .................................................................. 8
Operation ................................................................12
Service and Maintenance ......................................18
Troubleshooting .................................................... 26
Parts/Warranty .............. See Separate Supplement
Table of Contents
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all
models and the model depicted may differ from yours.
Zero-Turn Tractor
Lapbar Drive Control Levers

MTD Cub Cadet Ultima ZTX4 60 Specifications

General

Brand	MTD
Model	Cub Cadet Ultima ZTX4 60
Category	Tractor
Language	English

Summary

Operator's Manual Introduction

Safety Warnings and Proposition 65 Notice

Important safety warnings, including California Proposition 65 chemical disclosures for engine exhaust and batteries.

Safe Operations Practices - General

Operator Protective System (ROPS and Seat Belt)

Details on the tractor's ROPS and seat belt assembly, emphasizing proper use and safety.

Safe Operations Practices - Specifics

ROPS and Seat Belt Safety Guidelines

Importance of ROPS and seat belts, potential hazards, and inspection requirements for safe operation.

Child Safety Precautions

Critical warnings regarding children's presence and interaction with the tractor during operation.

Safe Operations Practices - Hazards

Slope Operation Guidelines

Specific safety rules for operating on slopes, including angle limits and turning techniques.

Fire, Fuel, Hauling, and Towing Safety

Precautions for fire, fuel, hauling, and towing, including specific warnings.

Safe Operations Practices - Service and Emissions

Service Safety Precautions

Safety measures to take before performing maintenance, including disengaging controls and removing the key.

Safety Symbols and Warnings

Understanding Safety Symbols

Explanation and depiction of various safety symbols that may appear on the tractor and their meanings.

Slope Gauge for Safe Operation

Using the Slope Gauge

Step-by-step instructions on how to use the provided slope gauge to determine safe operating angles.

Tractor Assembly - Initial Steps

Installing Hitch, ROPS, and Operator Seat

Procedures for installing the hitch, adjusting ROPS, and installing the operator's seat.

Tractor Assembly - Controls and Battery

Battery Information and Warnings

Tractor Assembly - Electrical and Battery

Connecting, Maintaining, and Charging the Battery

Tractor Assembly - Seat Adjustments

Tractor Operation - Controls Overview

Drive Controls, Deck Height, and PTO Operation

Tractor Operation - Controls and Indicators

Tractor Operation - Starting and Safety

Safety Interlock System Checks

How to check the safety interlock circuits to ensure proper function and operator safety.

Starting the Engine Procedures

Tractor Operation - Driving and Turning

Driving and Turning Forward

Tractor Operation - Advanced Driving

Reverse Driving, Zero Turns, and PTO Engagement

Mowing Operation

Mowing Safety Precautions

Warnings to keep bystanders away and ensure the mowing area is free of debris.

Mowing Procedures and Best Practices

Service and Maintenance Schedule

Periodic Maintenance Tasks Overview

A comprehensive schedule of maintenance tasks and their recommended intervals for optimal tractor performance.

Service and Maintenance - Care and Cleaning

Post-Operation Care, Cleaning, and Storage

Service and Maintenance - Engine and Transmission

Engine Oil, Lubrication, and Tires

Transmission Oil and Filter Service

Service and Maintenance - Storage and Adjustments

Service and Maintenance - Deck and Electrical

Service and Maintenance - Deck Removal

Deck Removal Procedures

Service and Maintenance - Deck Installation and Belt

Deck Installation Procedures

Service and Maintenance - Blades and Belts

Tractor Blade Care and Replacement

Troubleshooting Guide

Engine and Mowing Issue Resolution

Common problems like engine issues, overheating, and uneven cuts, with their causes and remedies.