To Next PageTo Next Page
Need help?Do you have a question about the MTD Yard Machines Y780 and is the answer not in the manual?
General| Engine Type | 2-Cycle |
|---|---|
| Cutting Width | 17 inches |
| Line Diameter | 0.095 inches |
| Cutting System | Dual Line |
| Starting System | Pull Start |
Core safety guidelines and precautions for operating the unit.
Procedures and advice for safe operation of the trimmer/brushcutter.
Specific safety instructions for using the cutting blade accessory.
Post-operation care and storage recommendations for the unit.
Additional safety advice for storage, transport, and general handling.
Explanation of symbols and pictographs used in the manual.
Detailed guidance on mixing fuel and oil for optimal engine performance.
Recommendations for using fuel additives to maintain engine health.
Precautions and guidelines for using blended fuels.
Step-by-step guide to attach and properly position the handlebar.
Instructions for correctly fitting and adjusting the shoulder harness.
Procedures for attaching and detaching the cutting attachment shield.
Steps for removing the cutting attachment and installing the blade.
Detailed steps for mounting the cutting blade onto the unit.
Procedures for safely detaching the cutting blade from the unit.
Guide for attaching the cutting attachment to the output shaft.
Step-by-step guide to start the trimmer/brushcutter engine.
Procedures for safely shutting down the engine and unit.
Proper body posture and hand grip for safe and effective trimmer operation.
Method for releasing and extending the trimmer line.
Advice for optimizing cutting performance and efficiency.
Techniques for precise trimming around objects and surfaces.
Safety and operational guidance for using the cutting blade.
Best practices for operating the unit with a cutting blade.
Overview of routine maintenance tasks and their required frequency.
Instructions for installing new trimmer line into the cutting head.
Specific steps for installing single-strand trimmer line.
Guide for installing dual-strand trimmer line using the SplitLine™™ system.
Procedure for replacing the trimmer line spool with a pre-wound unit.
Steps for accessing and cleaning the air filter assembly.
Detailed instructions for washing, drying, and oiling the air filter.
Guidance on adjusting the carburetor for optimal engine performance.
Importance of correct fuel mixture and clean air filter before adjustments.
Procedure for adjusting the engine's idle speed for smooth operation.
Steps for removing, inspecting, and installing a spark plug.
Instructions for cleaning the exterior of the unit.
Procedures for short-term storage, long-term storage, and safe transportation.
Common causes and solutions for an engine that fails to start.
Troubleshooting steps for an engine that does not idle properly.
Causes and fixes for an engine that hesitates or fails to accelerate.
Diagnosing and resolving issues with reduced power or stalling during use.
Solutions for problems with trimmer line not feeding out correctly.
Troubleshooting for trimmer line that feeds out excessively.
Technical specifications for the unit's engine.
Technical specifications for the drive shaft and cutting components.
Explanation of consumer rights and responsibilities regarding emission control warranty.
Key duties of the owner to maintain warranty coverage.
Details on what parts are covered and for how long under warranty.
Instructions on how to get warranty service and find a dealer.
Information on how state laws affect the warranty terms.
