To Next PageTo Next Page
Need help?Do you have a question about the MTI Plunger Lock and is the answer not in the manual?
Illustrates the main components of the plunger lock: the body and the latch mechanism.
Shows the CR-123 battery and two mounting templates (A and B) for installation.
Details various latch spacers (D, E, F), adhesive VHB, and screws for installation.
Lists separately sold key sets: Starter Set, User Key Bulk, and Connect Card.
Step-by-step guide for registering authorization and user keys with the lock.
Instructions for clearing all registered keys in non-Connect mode.
Guides on connecting the lock to a mesh network via a Connect Hub and card.
Steps to disable the mesh network and return the lock to standalone operation.
Methods for resetting the lock to its original factory default settings.
Describes operational features like Door Open Mode, Stuck Lock, and Low Battery indicators.
Instructions on using a gauge to select the correct spacer for door gaps.
Details on attaching spacers to the latch with screws or adhesive.
Ensures keys are registered and shows placement of Template A for door alignment.
Guides on placing the latch and using Template B for aligning the lock body.
Details FCC ID, operational conditions, and RF exposure compliance distance.
Provides ISED certification number and compliance statements for Canada.
Lists operating frequency, temperature range, and maximum power output.
Illustrates the steps required to remove the lock from its installed position.
Guides on battery replacement and warnings about incorrect battery types.
Information on responsible recycling and preventing environmental harm.
General