1770 Brackett St., La Verne CA 91750 USA
•
T:
909-629-7301
•
F:
909-629-7380
•
www.mtnproducts.com
•
sales@mtnproducts.com
Reliably Serving a Thirsty World
®
POU Install
•
Press and hold the “Hot” water button for
about 3 seconds to select hot function.
Then press “Water” (energizes hot water
pump & solenoid) to dispense water.
•
The ring at the “Water” dispense button
will glow red.
•
Approximately 15 seconds after releasing
the “Water” dispense button, the hot water
function will lock out.
•
15 seconds after the last button press, the
system turns off the selected feature and the
ring goes dark.
To Next Page
Loading...
