MTS Systems 111 Series User Manual

Series 111 Accumulators Introduction
5
Introduction
The Series 111 Accumulator stabilize the hydraulic lines in your system.
There are two models availlable:
• The Model 111.11B Accumulator is a boss port-mounted accumulator
that requires a boss adapter fitting for mounting.
• The Model 111.12C Accumulator is bolt-mounted to a flange and
typically has a larger nitrogen gas capacity than the Model 111.11B.
Contents
Functional Description 6
Specifications 7
What you need to
know
MTS Systems Corporation assumes that you know how to use your
controller. See the appropriate manual for information about performing
any controller-related step in this manual’s procedures. You are expected
to know how to perform the following procedures:
• Turning hydraulic pressure on and off
• Selecting a control mode
• Manually adjusting the actuator position

MTS Systems 111 Series Specifications

General

Brand	MTS Systems
Model	111 Series
Category	Medical Equipment
Language	English