MTS Systems E43.104 User Manual

Specifications
MTS Exceed™ Series 40 Product Manual Introduction
33
Specifications of Model E43
Exceed model
E43.104
Maximum rated force capacity 10 kN (2200 lbf)
Force capacity options 5 N, 10 N, 20 N, 50 N, 100 N, 200 N, 500 N,1 kN, 2 kN, 5 kN,
10 kN
(1 lbf, 2 lbf, 5 lbf, 10 lbf, 20 lbf, 45 lbf, 110 lbf, 220 lbf, 450 lbf,
1100 lbf, 2200 lbf)
Frame type Table-top
Test zone Single
Maximum test speed 500 mm/min
(19.7 in/min)
Minimum test speed 0.001 mm/min (0.00004 in/min)
Position resolution 0.000041 mm(0.0000016 in)
Vertical test space crosshead travel
Standard length
Extended length
1000 mm (39.4 in)
1300 mm (51.2 in)
Space between columns 340 mm (13.4 in)
Frame height
Standard length
Extended length
1617 mm (63.7 in)
1917 mm (75.5 in)
Frame width 681 mm (26.81 in)
Frame depth 588 mm (23.15 in)
Weight
Standard length
Extended length
120 kg (265 lb)
130 kg (287 lb)
Power requirements 200 -230 V AC
3 Amp
50/60 Hz
600 W
1 Phase
0Exceed product manual.book Page 33 Wednesday, August 27, 2014 2:55 PM

MTS Systems E43.104 Specifications

General

Brand	MTS Systems
Model	E43.104
Category	Test Equipment
Language	English