Need help?Do you have a question about the MTS Systems Landmark 370 Series and is the answer not in the manual?
General| Horizontal Test Space | Customizable |
|---|---|
| Frequency Range | Up to 100 Hz, depends on model, actuator, and test conditions |
| Control Modes | Force, displacement, strain |
| Software | MTS TestSuite |
| Power Requirements | 380-480 VAC, 3-phase, 50/60 Hz |
| Data Acquisition | High-speed, multi-channel data acquisition system included |
Provides methods for obtaining technical assistance from MTS.
General safety guidelines for operating and maintaining the MTS system.
Safety practices to follow before powering up the test system.
Safety precautions during system operation.
Explains the closed-loop control concept of MTS Landmark systems.
Lists tasks required for specimen installation.
Details steps for installing the specimen into the load frame.
Outlines steps to prepare the system before running the test.
Explains how to execute the Example HCF Test.
Guides on specimen removal after testing.
Steps to recover the system after a limit has been tripped.
Checklist for recommended maintenance tasks based on running time.
To Next Page
