MTS Systems E43.104 User Manual

MTS Exceed™ Series 40 Product Manual
74
Handset Control
Operation
7 Connector
RJ-45, to Controller.
8 Crosshead Return
Returns the crosshead to the original position (zero point).
9 Start
Starts the test action. Only if the testing software is active.
10 Crosshead Down
Moves the crosshead in the downward direction while
depressed. Only if Handset Enable is active.
11 Crosshead Up
Moves the crosshead in the upward direction while depressed.
Only if Handset Enable is active.
12 Fault
When lit, indicates an active fault or interlock.
13 Handset enable
Pressing with an interlock active attemps to clear the interlock.
Pressing when there are no active interlocks enables the
handset for local control.
When the indicator is lit, the handset is enabled for control of the
crosshead.
14 Display
Four lines, 20 characters per line.
Handset Controls and Indicators (part 2 of 2)
0Exceed product manual.book Page 74 Wednesday, August 27, 2014 2:55 PM

MTS Systems E43.104 Specifications

General

Brand	MTS Systems
Model	E43.104
Category	Test Equipment
Language	English