MTS Systems Exceed 40 Series Site Preparation Guide

MTS Exceed™ Series 40 Site Preparation Guide
40
Moving E44 and E45(Standing position) Frames
Lift and Move Instructions
6. Place the load frame carefully into position.
7. Remove the lifting straps from the top plate, and any protective padding, if
used.
When the frame is in its testing location, you can proceed with the installation
process.
Lifting Load Frame with a Crane
Crane Hook
Lifting Sling
Load Frame
Do not exceed 30 °
Hoist Ring

MTS Systems Exceed 40 Series Specifications

General

Brand	MTS Systems
Model	Exceed 40 Series
Category	Test Equipment
Language	English