What to do if my MTU 12 V 4000 L62 Engine shows 'Lube Oil Min'?
If your MTU Engine displays a 'Lube Oil Min' message, it indicates that the minimum engine oil level has been detected. You should check the engine oil level and the replenishment system.
What to do if my MTU 12 V 4000 L62 shows 'Lube Oil Max'?
If the MTU Engine shows 'Lube Oil Max', this indicates that the maximum engine oil level has been detected. You should check the engine oil level and the replenishment system.
What to do if the MTU Engine SS Coolant is too Low?
If the MTU Engine indicates that the SS Coolant is too Low, it means there is a lack of coolant in the cooling system, and the feedback signal from the level sensor is missing. First, check the sensor and cabling, replacing them if necessary. Then, check the coolant level and try to pinpoint any leakage.
What to do if my MTU 12 V 4000 L62 loses Communication with ECU?
If the MTU Engine displays 'Communication Lost ECU', it means there is no communication with the ECU CAN. Check the supply voltage and the connecting line.
What to do if my MTU Engine loses Communication with EMU?
If the MTU Engine displays 'Communication Lost EMU', it indicates no communication with the EMU CAN. Check the supply voltage and the connecting line.
What to do if my MTU 12 V 4000 L62 shows 'Error Missing Ring Gear Signal'?
If the MTU Engine displays 'Error Missing Ring Gear Signal', it means the crankshaft signal for ignition speed 182 teeth is missing. You should check sensor B13.2, its clearance, and cabling, and replace it if necessary. Note that a restart of the ignition system is required to restart the engine.
What to do if my MTU 12 V 4000 L62 Engine shows 'Error Missing Reset Signal'?
If the MTU Engine displays 'Error Missing Reset Signal', this indicates that the reset signal from the crankshaft is missing. Check sensor B75, its clearance and cabling, and replace if necessary. A restart of the ignition system is required to restart the engine.
What to do if my MTU 12 V 4000 L62 Engine shows 'Error Missing Camshaft Signal'?
If the MTU Engine displays 'Error Missing Camshaft Signal', it means the camshaft signal for ignition is missing. Check sensor B1.2, its clearance, and cabling, replacing if necessary. Restart of the ignition system is required to restart the engine.
What to do if my MTU Engine loses Communication with Knock Module?
If the MTU Engine displays 'Comm. Lost Knock Module', it signifies no communication with the knocking module CAN. Check the supply voltage and the connecting line.
What to do if my MTU 12 V 4000 L62 Engine loses Communication with Ignition?
If the MTU Engine displays 'Comm. Lost Ignition', it indicates no communication with the ignition CAN. Check the supply voltage and the connecting line.
General| Engine Type | Diesel |
|---|---|
| Cylinders | 12 |
| Configuration | V |
| Fuel Type | Diesel |
| Aspiration | Turbocharged |
| Cooling System | Liquid-cooled |
| Fuel System | Common rail |
| Emissions Compliance | IMO Tier II |
General safety principles and requirements for engine operation.
Requirements for trained personnel and organizational measures.
Safety precautions for starting and operating the engine.
Safety measures for maintenance and repair activities.
Overview of the engine's monitoring and control systems.
Steps for re-commissioning after long periods of inactivity.
Steps for re-commissioning after scheduled downtime.
Description of engine start, stop, and emergency stop sequences.
Actions and measures related to the emergency stop function.
Explanation of fault message abbreviations and structure on the SAM display.
Detailed list of SAM fault messages and their corrective actions.
List of engine governor fault messages and their corrective actions.
To Next Page