What to do if exhaust temperature is too high on B-side in MTU Engine?
If the exhaust temperature is too high on the B-side of your MTU Engine, it may be due to wiring damage. Check the air filter and wiring, and contact service for assistance.
What to do if my MTU 12 V 4000 M23F has black exhaust gas?
If your MTU Engine is emitting black exhaust gas, it could be due to: * A clogged air filter. Check the signal ring position of the service indicator. * A faulty fuel injector. Replace the injector. * Engine overload. Contact service for assistance.
What to do if my MTU 12 V 4000 M23F Engine turns on starting but does not fire?
If your MTU Engine turns on when starting but does not fire, it could be due to: * Poor rotation by the starter. Charge or replace the battery. * A low or faulty battery. Check the battery. * Defective engine cabling. Contact service for assistance.
Why is my MTU 12 V 4000 M23F overheating with charge-air temperature too high?
If the charge-air temperature is too high in your MTU Engine, consider these potential causes: * Incorrect coolant concentration. Check the coolant concentration using an MTU test kit. * A dirty intercooler. Contact service for assistance. * High air-intake temperature in the engine room. Check the fans and air supply/ventilation ducts.
What causes coolant level too low in MTU 12 V 4000 M23F Engine?
If the coolant level is too low in your MTU Engine, it is likely due to a leak in the coolant circuit. Check the coolant level in the expansion tank.
What to do if speed of primary turbocharger is too high in MTU 12 V 4000 M23F Engine?
If the speed of the primary turbocharger is too high in your MTU Engine, it may be due to a clogged charge-air circuit or a fault in the turbocharger. Check the air filter and contact service for assistance.
What to do if charge-air temperature is too high in MTU Engine?
If the charge-air temperature is too high in your MTU Engine, it may be due to the charge-air cooler not functioning correctly. Check the charge-air cooler and contact service for assistance.
What to do if coolant temperature is too high in charge-air cooler in MTU Engine?
If the coolant temperature in the charge-air cooler is too high in your MTU Engine, it indicates a defective coolant circuit for charge air. Reduce power, check the charge-air cooler and coolant cooler, and contact service for assistance.
What to do if the 'water alarm' pushbutton is lit on my MTU Engine?
When the 'water alarm' illuminated pushbutton is lit on your MTU Engine, it indicates that the maximum water level has been reached, and the water level electrode has opened the water drain valve. If the valve's opening period exceeds 4 minutes, the pump will switch off, initiating the alarm. 1. Press the illuminated pushbutton 'Water alarm' to acknowledge the alarm. 2. You can also drain water manually by pressing the illuminated pushbutton 'Water drain' to open the drain valve.
What to do if my MTU 12 V 4000 M23F speed is not steady?
If your MTU Engine speed is unsteady, consider these potential causes: * A faulty fuel injector. Replace the injector. * A defective speed transmitter. Contact service for assistance. * A defective engine governor. Contact service for assistance.
General| Number of Cylinders | 12 |
|---|---|
| Bore | 170 mm |
| Stroke | 210 mm |
| Rated Speed | 1800 rpm |
| Engine Speed | 1800 rpm |
| Fuel Type | Diesel |
| Cooling System | Liquid-cooled |
| Engine Type | Four-stroke diesel engine |
| Displacement | 57.2 liters |
| Cylinder Arrangement | V-type |
| Emission Standards | IMO Tier II |
To Next Page