MTU 12V 2000 G83 - Engine Mounts; Engine Mounts - Resilient Elements Check

Engine Mounts 6–61
6.19 Engine Mounts
6.19.1 Engine mounts – Resilient elements check
Preconditions
• Engine is stopped and starting disabled.
• Engine is filled with coolant and engine oil.
Engine mounts – Resilient elements check
1. Wipe rubber surface with dry cloth, do not use
organic detergents.
2. Check resilient elements for crack formation and
deformation by visual inspection.
3. Have cracked elements replaced, contact
Service.
Setting dimension check
1. Measure setting dimension:
• Dimension (a) = 55 mm.
2. If dimension (a) is less than 55 mm, resilient elements must be replaced. Contact S ervice.
M015560/00E 03-05 ©MTU