5.10 Engine – Emergency stop
NOTICE
An emergency stop subjects the engine system to an extremely high load.
Risk of overheating, damage to components!
• Trigger an emergency stop only in emergency situations.
Emergency engine stop from LOP
Item Action
Emergency stop pushbutton Press pushbutton.
• Engine is stopped by disconnecting the power supply to the ECU;
• Signaling (e.g. by horn, flashing lamp) is tripped.
After emergency engine stop from LOP
Item Action
Control cabinet, control pan-
el etc. (depending on manu-
facturer)
Press pushbutton for alarm acknowledgment.
• Audible and visual alarm signaling stops.
188 | Operation | MS15038/01E 2018-11
TIM-ID: 0000002305 - 004
To Next Page
Loading...
