MTU 16V4000M63 - Engine Control Unit ECU 7 - Checking Plug Connections

8.24.2 Engine Control Unit ECU 7 – Checking plug connections
Preconditions
☑ Engine is stopped and starting disabled.
Check plug connections on ECU
7
1. Check all connectors on ECU for firm seating.
Ensure that the clips (1) are engaged.
2. Check screws (2) of cable clamps on ECU for
firm seating. Ensure that cable clamps are
not faulty.
MS15035/00E 2018-08 | Accessories for (Electronic) Engine Governor / Control System | 259
TIM-ID: 0000016847 - 006