How to fix HI T-Exhaust Mean on MTU 20V4000L63 Engine?
If the average exhaust temperature of all cylinders is too high on your MTU Engine, it's advisable to first check the emission values. Then, inspect the ignition timing and ensure the exhaust valves are closing correctly by checking the valve drive. These steps can help resolve the issue.
What to do if HIHI T-Exhaust Mean error appears on MTU 20V4000L63?
If the average exhaust temperature of all cylinders is excessively high on your MTU Engine, you should check the emission values. Also, verify the ignition timing and check the valve drive to ensure the exhaust valves are closing properly.
How to troubleshoot HI T-Exhaust A1 on MTU Engine?
If the exhaust temperature of a cylinder is too high compared to the average on your MTU Engine, start by checking the emission values. Next, verify the ignition timing. Finally, inspect the valve drive to ensure the exhaust valves are closing correctly.
How to resolve HI T-Exhaust A4 error on MTU 20V4000L63?
If the exhaust temperature of a cylinder is too high compared to the average on your MTU Engine, begin by checking the emission values. Then, verify the ignition timing and make sure the exhaust valves are closing correctly by checking the valve drive.
What should I do if HI T-Exhaust A5 appears on MTU Engine?
If the exhaust temperature of a cylinder is too high compared to the average on your MTU Engine, check the emission values, verify the ignition timing, and check the valve drive to ensure the exhaust valves are closing correctly.
How can I fix HI T-Exhaust A7 on MTU 20V4000L63?
If the exhaust temperature of a cylinder is too high compared to the average on your MTU Engine, check the emission values. Verify the ignition timing and check the valve drive, ensuring the exhaust valves are closing correctly.
How to deal with HI T-Exhaust A8 error on MTU 20V4000L63 Engine?
If the exhaust temperature of a cylinder is too high compared to the average on your MTU Engine, check the emission values, verify the ignition timing, and check the valve drive to ensure the exhaust valves are closing correctly.
What are the possible solutions for HI T-Exhaust A9 on MTU 20V4000L63?
If the exhaust temperature of a cylinder is too high compared to the average on your MTU Engine, you can check emission values, ignition timing, and the valve drive, ensuring that exhaust valves are closing properly.
How to troubleshoot HI T-Exhaust A10 on MTU 20V4000L63 Engine?
If the exhaust temperature of a cylinder is too high compared to the average on your MTU Engine, you should check the emission values, verify the ignition timing, and check the valve drive to ensure the exhaust valves are closing correctly.
General| Engine Type | Diesel |
|---|---|
| Configuration | V20 |
| Fuel Type | Diesel |
| Bore | 170 mm |
| Stroke | 210 mm |
| Rated Speed | 1500 rpm |
| Compression Ratio | 16.5:1 |
| Fuel Consumption | 200 g/kWh |
| Aspiration | Turbocharged and intercooled |
| Displacement | 95.4 L |
| Speed | 1500 rpm |
| Cooling System | Liquid-cooled |
| Emission Standards | EPA Tier 2 |
Key provisions and information for all products, covering nameplate and general use.
Covers essential safety rules for starting and operating the engine.
Specific safety instructions for starting/operating with gaseous fuel.
Outlines safety procedures for maintenance and repair tasks.
Specific safety rules for maintenance/repair involving gaseous fuel.
Detailed technical specifications for engine variants.
Overview of the engine's monitoring and control systems.
Procedure for recommissioning an engine after long-term storage.
Describes automatic sequences for engine start, stop, and emergency stop.
Instructions and preconditions for starting the engine.
Regular checks to be performed during engine operation.
Instructions and precautions for safely shutting down the engine.
Procedure for activating and rectifying the cause of an emergency stop.
A table listing maintenance tasks and corresponding page references.
Explanation of abbreviations and fault indications on the SAM display.
Detailed list of SAM fault messages and their corrective actions.
List of fault messages generated by the engine governor and their causes.
Procedure for replacing the spark plug.
Procedure for checking and adjusting ignition timing.
Procedure for checking and adjusting valve clearance.
Procedure for checking the engine oil level.
Step-by-step guide for changing the engine oil.
Procedure for checking the engine coolant level.
To Next Page
