What should I do if the lube oil temperature at sensor B7 has exceeded limit value 1 in my MTU Engine?
If the lube oil temperature at sensor B7 exceeds limit value 1, reduce power, check the operation of the cooler and fan (plant side), and check the engine coolant level. Contact Service.
What should I do if the lube oil temperature at sensor B7 has exceeded limit value 2 in my MTU Engine?
If the lube oil temperature at sensor B7 has exceeded limit value 2, check the operation of the cooler and fan (plant side), and check the engine coolant level. Contact Service.
What should I do if the coolant pressure at sensor B16 has fallen below limit value 1 in my MTU Engine?
If the coolant pressure at sensor B16 falls below limit value 1, check the relief bore of the engine coolant pump, and check the engine coolant level. Contact Service.
What should I do if the coolant pressure at sensor B16 has fallen below limit value 2 in my MTU Engine?
If the coolant pressure at sensor B16 falls below limit value 2, check the relief bore of the engine coolant pump, and check the engine coolant level. Contact Service.
What should I do if the coolant temperature at sensor B6.1 has exceeded limit value 1 in my MTU Engine?
If the coolant temperature at sensor B6.1 exceeds limit value 1, reduce power, check the operation of the cooler and fan (plant side), and check the engine coolant level. Contact Service.
General safety information and intended use of the product.
Safety rules to follow before and during engine startup and operation.
Safety guidelines for performing maintenance and repair tasks on the engine.
Guidelines for fire safety, environmental protection, and handling of fluids and lubricants.
Detailed description of the engine's systems and components.
Visual overview of the engine with labeled components.
Identification and function of key sensors and actuators on the engine.
Technical specifications for various engine models and configurations.
Provides the overall physical dimensions of the engine.
Procedures for starting and stopping the engine, including manual trials.
How to perform an emergency stop and post-stop procedures.
Routine checks to perform during engine operation.
Reference table linking tasks to maintenance schedule entries.
Guide to diagnosing and resolving common engine problems.
Lists fault messages from the engine governor and their corrective actions.
Information related to SOLAS requirements and installation of shielding.
Tasks related to engine barring, test runs, and component maintenance.
Step-by-step guide to replacing the engine's fuel filter.
Detailed procedure for replacing the engine oil filter.
Procedures for checking, changing, draining, and filling engine coolant.
Inspection and replacement procedures for the engine's belt drive system.
Checks for engine cabling, wiring, and engine governor connections.
Glossary of abbreviations used throughout the manual.
List of special tools required for maintenance and repair tasks.
To Next Page
General