MTU 8 V 2000 M84 - Table of Contents

Table of Contents
1 Safety
1.1 General conditions 5
1.2 Personnel and organizational requirements 6
1.3 Transportation 7
1.4 Safety regulations for startup and operation 10
1.5 Safety regulations for maintenance and
repair work 11
1.6 Auxiliary materials, fire prevention and
environmental protection 14
1.7 Conventions for safety instructions in the
text 16
2 General Information
2.1 Engine side and cylinder designations 17
2.2 Product description 18
2.3 Engine layout 24
2.4 Sensors, actuators and injectors –
Overview 26
3 Technical Data
3.1 8V 2000M84 engine data 31
3.2 10V 2000 M84 engine data 34
3.3 Firing order 37
3.4 Engine – Main dimensions 38
4 Operation
4.1 Putting the engine into operation after
extended out-of-service periods (>3
months) 39
4.2 Engine – Putting into operation after
scheduled out-of-service-period 40
4.3 Tasks after extended out-of-service periods
(>3 weeks) 41
4.4 Checks prior to start-up 42
4.5 Fuel treatment system – Putting into
operation 43
4.6 Operational checks 45
4.7 Fuel treatment system – Switching on 46
4.8 Starting the engine 47
4.9 Stopping the engine 48
4.10 Emergency stop 49
4.11 After stopping the engine 50
4.12 Fuel treatment system – Shutdown 51
4.13 Plant – Cleaning 52
5 Maintenance
5.1 Maintenance task reference table [QL1] 53
6 Troubleshooting
6.1 Fuel treatment system – Troubleshooting 54
6.2 Troubleshooting 55
7 Task Description
7.1 SOLAS 58
7.1.1 SOLAS shielding – Installation as per MTN
5233 58
7.1.2 SOLAS shielding – Installation 59
7.1.3 Installation locations for SOLAS shielding 60
7.2 Engine 66
7.2.1 Engine – Barring manually 66
7.2.2 Engine – Barring with starting equipment 67
7.3 Cylinder Liner 68
7.3.1 Cylinder liner – Endoscopic examination 68
7.3.2 Cylinder liner – Instructions and comments on
endoscopic and visual examination 70
7.4 Crankcase Breather 72
7.4.1 Crankcase breather – Cleaning oil separator
element 72
7.4.2 Crankcase ventilation – Oil separator element
replacement, diaphragm check and
replacement 73
7.5 Valve Drive 75
7.5.1 Valve clearance – Check and adjustment 75
7.5.2 Cylinder-head cover – Removal and
installation 78
7.6 Injection Valve / Injector 79
7.6.1 Injector – Replacement 79
7.6.2 Injector – Removal and installation 80
7.7 Fuel System 82
7.7.1 Fuel system – Venting 82
7.8 Fuel Filter 83
7.8.1 Fuel filter – Replacement 83
7.8.2 Fuel prefilter – Differential pressure check and
adjustment of gauge 85
7.8.3 Fuel prefilter – Draining 86
MS150062/01E 2012-01 | Table of Contents | 3
DCL-ID: 0000017103 - 001