Section G. Maintenance Belarus – 90/92 Operating manual
77
Operation 3. Oil level in hydraulic system tank
NOTE: Before checking oil level, put
tractor on level horizontal terrain. Shut
down diesel and break the tractor with
parking brake.
Check oil level on oil-metering glass (1) on
the left-hand side of hydraulic assemblies’
casing. The level should be between
marks “0” and “P”. If necessary, fill oil up
to mark “P” ±5mm, having unscrewed
threaded plug (2).
NOTE: When machines with large oil
consumption are used, fill oil up to the
lever of top mark «С». All hydraulic
cylinders, including rear cylinder, should
have rods drawn in.
Operation 3а. Steering
Check operational capability of steering
system. Look over, check aurally, test in
running order.
https://tractormanualz.com/
To Next Page
Loading...